Genuine CHIMEI POLYLAC ABS PA-707 original 25kg packaging & material.
CHIMEI POLYLAC ABS PA-707
High-rigidity, high-gloss general purpose ABS for rigid appearance parts.
- High rigidity
- High surface gloss
- Good dimensional stability
- Easy to paint
Product Summary & Applications
Key characteristics
- High rigidity
- High surface gloss
- Good dimensional stability
- Easy to paint
Typical applications
- Telephone housings
- Appliance shells
- Office equipment
- Cosmetic boxes
Application insight
PA-707 is the workhorse for telephone bodies and small appliance shells where a rigid, high-gloss surface is required without secondary painting. Its high flexural modulus keeps thin walls from warping on the production line.
Cross-tags
Manufacturing & Quality Control
Injection-molding production line processing CHIMEI POLYLAC ABS resin.
Consistent supply, batch after batch
CHIMEI POLYLAC ABS PA-707 is supplied in the original 25kg moisture-proof packaging, stored in palletized warehouse stock and loaded into export containers for worldwide delivery. Lot numbers on every bag give full traceability from resin lot to your loading list.
Quality assurance
Each incoming lot is checked against the official TDS - melt flow, color and mechanical retention samples are kept for every shipment, and COA / MSDS / UL 94 documentation ships with the goods on request.
Technical Data Sheet - PA-707
Typical properties of CHIMEI POLYLAC ABS PA-707. Values marked 【待核实】 are family-typical estimates and must be confirmed against the official CHIMEI TDS.
| Property | Value |
|---|---|
| Melt Flow Rate | 18 g/10min |
| Density | 1.05 g/cm³ |
| Tensile Strength | 47 MPa |
| Izod Impact | 20 kJ/m² |
| Heat Deflection Temp | 95 °C |
| Flammability | HB - |
Test conditions: MFR at 220°C/10kg; properties per relevant ISO/ASTM methods. Always validate on your tool.
Processing Guidelines
Recommended injection-molding window for CHIMEI ABS PA-707.
- Drying temperature80 - 85 °C
- Drying time2 - 4 h
- Residual moisture< 0.05%
- Cylinder temperature200 - 240 °C
- Mold temperature50 - 80 °C
- Back pressure50 - 100 MPa
- Screw speed40 - 80 rpm
ABS is hygroscopic - pre-dry before processing to avoid silver streaks. All values are typical; confirm against the official TDS.
Mold tooling set up for PA-707 trial runs.
Download Center
Technical and compliance documents for CHIMEI ABS PA-707 are available on request.
- CHIMEI ABS PA-707 Technical Data Sheet (TDS) - request via contact page »
- CHIMEI ABS PA-707 Safety Data Sheet (MSDS/SDS) - request via contact page »
- CHIMEI ABS PA-707 RoHS Compliance - request via contact page »
- CHIMEI ABS PA-707 REACH SVHC - request via contact page »
- CHIMEI ABS PA-707 UL 94 Yellow Card - request via contact page »
- CHIMEI ABS PA-707 Certificate of Analysis (COA) - request via contact page »
All documents are provided free of charge - contact us with your company name and required grade, and we will send the PDFs by email or WhatsApp.
Selection & Differentiation
When to choose PA-707
Choose PA-707 when stiffness and gloss outrank impact. If the part sees drops or snap-fit stress, step up to PA-747 (high impact) or PA-757 (slightly higher flow/gloss balance).
Selection advice
PA-707 vs PA-757: PA-757 flows a touch easier and is the more common export grade; PA-707 trades some flow for equal rigidity at lower cost.
Related CHIMEI ABS grades
Compare PA-707
Frequently asked questions
What is CHIMEI ABS PA-707 used for?
PA-707 is the workhorse for telephone bodies and small appliance shells where a rigid, high-gloss surface is required without secondary painting. Its high flexural modulus keeps thin walls from warping on the production line.
When should I choose PA-707 over similar grades?
Choose PA-707 when stiffness and gloss outrank impact. If the part sees drops or snap-fit stress, step up to PA-747 (high impact) or PA-757 (slightly higher flow/gloss balance).
What are the processing conditions for PA-707?
80 - 85 °C drying, 200 - 240 °C cylinder, 50 - 80 °C mold. See the Processing Guidelines section above.
Can I get TDS / MSDS / UL for PA-707?
Yes - request TDS, MSDS, RoHS, REACH and UL 94 documents for PA-707 via the contact page or WhatsApp, and we will send the PDFs directly.