Genuine CHIMEI POLYLAC ABS PA-765A original 25kg packaging & material.
CHIMEI POLYLAC ABS PA-765A
Halogen-free flame-retardant ABS (UL 94 V-0) - the eco-compliant FR reference.
- UL 94 V-0
- Halogen-free
- RoHS/REACH friendly
- E&E green directive ready
Product Summary & Applications
Key characteristics
- UL 94 V-0
- Halogen-free
- RoHS/REACH friendly
- E&E green directive ready
Typical applications
- Power adapters
- Connectors
- Charger housings
- EV charging parts
Application insight
PA-765A is the halogen-free flagship FR grade, specified for chargers, adapters and EV charging accessories that must meet halogen-free green directives while holding UL 94 V-0.
Cross-tags
Manufacturing & Quality Control
Injection-molding production line processing CHIMEI POLYLAC ABS resin.
Consistent supply, batch after batch
CHIMEI POLYLAC ABS PA-765A is supplied in the original 25kg moisture-proof packaging, stored in palletized warehouse stock and loaded into export containers for worldwide delivery. Lot numbers on every bag give full traceability from resin lot to your loading list.
Quality assurance
Each incoming lot is checked against the official TDS - melt flow, color and mechanical retention samples are kept for every shipment, and COA / MSDS / UL 94 documentation ships with the goods on request.
Technical Data Sheet - PA-765A
Typical properties of CHIMEI POLYLAC ABS PA-765A. Values marked 【待核实】 are family-typical estimates and must be confirmed against the official CHIMEI TDS.
| Property | Value |
|---|---|
| Melt Flow Rate | 24 g/10min |
| Density | 1.18 g/cm³ |
| Tensile Strength | 46 MPa |
| Izod Impact | 18 kJ/m² |
| Heat Deflection Temp | 85 °C |
| Flammability | V-0 (halogen-free) - |
Test conditions: MFR at 220°C/10kg; properties per relevant ISO/ASTM methods. Always validate on your tool.
Processing Guidelines
Recommended injection-molding window for CHIMEI ABS PA-765A.
- Drying temperature80 - 85 °C
- Drying time2 - 4 h
- Residual moisture< 0.05%
- Cylinder temperature200 - 240 °C
- Mold temperature50 - 80 °C
- Back pressure50 - 100 MPa
- Screw speed40 - 80 rpm
ABS is hygroscopic - pre-dry before processing to avoid silver streaks. All values are typical; confirm against the official TDS.
Mold tooling set up for PA-765A trial runs.
Download Center
Technical and compliance documents for CHIMEI ABS PA-765A are available on request.
- CHIMEI ABS PA-765A Technical Data Sheet (TDS) - request via contact page »
- CHIMEI ABS PA-765A Safety Data Sheet (MSDS/SDS) - request via contact page »
- CHIMEI ABS PA-765A RoHS Compliance - request via contact page »
- CHIMEI ABS PA-765A REACH SVHC - request via contact page »
- CHIMEI ABS PA-765A UL 94 Yellow Card - request via contact page »
- CHIMEI ABS PA-765A Certificate of Analysis (COA) - request via contact page »
All documents are provided free of charge - contact us with your company name and required grade, and we will send the PDFs by email or WhatsApp.
Selection & Differentiation
When to choose PA-765A
Pick PA-765A whenever halogen-free is contractually required (most EU/tech-brand specs). It is the default FR grade for eco-compliant electronics; PA-765 is the cost option when halogens are allowed.
Selection advice
PA-765A vs PA-765: same V-0 rating, halogen-free vs standard. vs PA-765B: PA-765B flows higher for thin-wall FR.
Related CHIMEI ABS grades
Compare PA-765A
Frequently asked questions
What is CHIMEI ABS PA-765A used for?
PA-765A is the halogen-free flagship FR grade, specified for chargers, adapters and EV charging accessories that must meet halogen-free green directives while holding UL 94 V-0.
When should I choose PA-765A over similar grades?
Pick PA-765A whenever halogen-free is contractually required (most EU/tech-brand specs). It is the default FR grade for eco-compliant electronics; PA-765 is the cost option when halogens are allowed.
What are the processing conditions for PA-765A?
80 - 85 °C drying, 200 - 240 °C cylinder, 50 - 80 °C mold. See the Processing Guidelines section above.
Can I get TDS / MSDS / UL for PA-765A?
Yes - request TDS, MSDS, RoHS, REACH and UL 94 documents for PA-765A via the contact page or WhatsApp, and we will send the PDFs directly.