Home › CHIMEI ABS › PA-747
CHIMEI POLYLAC PA-747 ABS resin original 25kg bag packaging - CHIMEI POLYLAC ABS PA-747

Genuine CHIMEI POLYLAC ABS PA-747 original 25kg packaging & material.

HighSuper High Impact

CHIMEI POLYLAC ABS PA-747

High-impact ABS for tough, drop-resistant components.

  • High impact
  • Good toughness
  • Low-temperature resistance
  • Robust

Get PA-747 Bulk Quote Download Docs

Product Summary & Applications

Key characteristics

  • High impact
  • Good toughness
  • Low-temperature resistance
  • Robust

Typical applications

  • Power-tool housings
  • Helmet shells
  • Luggage
  • Sports equipment

Application insight

PA-747 is specified for power-tool bodies and protective gear where repeated impact would crack a GP grade. Its higher rubber content absorbs shock while staying moldable.

Cross-tags

Power ToolsAutomotiveSports High Impact

Manufacturing & Quality Control

CHIMEI POLYLAC ABS resin injection molding production line in factory

Injection-molding production line processing CHIMEI POLYLAC ABS resin.

Consistent supply, batch after batch

CHIMEI POLYLAC ABS PA-747 is supplied in the original 25kg moisture-proof packaging, stored in palletized warehouse stock and loaded into export containers for worldwide delivery. Lot numbers on every bag give full traceability from resin lot to your loading list.

Quality assurance

Each incoming lot is checked against the official TDS - melt flow, color and mechanical retention samples are kept for every shipment, and COA / MSDS / UL 94 documentation ships with the goods on request.

Technical Data Sheet - PA-747

Typical properties of CHIMEI POLYLAC ABS PA-747. Values marked 【待核实】 are family-typical estimates and must be confirmed against the official CHIMEI TDS.

PropertyValue
Melt Flow Rate16 g/10min
Density1.04 g/cm³
Tensile Strength42 MPa
Izod Impact35 kJ/m²
Heat Deflection Temp90 °C
FlammabilityHB -

Test conditions: MFR at 220°C/10kg; properties per relevant ISO/ASTM methods. Always validate on your tool.

Processing Guidelines

Recommended injection-molding window for CHIMEI ABS PA-747.

  • Drying temperature80 - 85 °C
  • Drying time2 - 4 h
  • Residual moisture< 0.05%
  • Cylinder temperature200 - 240 °C
  • Mold temperature50 - 80 °C
  • Back pressure50 - 100 MPa
  • Screw speed40 - 80 rpm

ABS is hygroscopic - pre-dry before processing to avoid silver streaks. All values are typical; confirm against the official TDS.

Precision injection mold tooling for CHIMEI POLYLAC ABS processing - CHIMEI POLYLAC ABS PA-747

Mold tooling set up for PA-747 trial runs.

Download Center

Technical and compliance documents for CHIMEI ABS PA-747 are available on request.

All documents are provided free of charge - contact us with your company name and required grade, and we will send the PDFs by email or WhatsApp.

Selection & Differentiation

When to choose PA-747

Choose PA-747 when toughness beats gloss. For even colder environments or extreme impact, move to PA-709; for extruded sheet/pipe, use PA-747S.

Selection advice

PA-747 vs PA-709: PA-709 is the super-high-impact/low-temp grade; PA-747 covers general high-impact needs at lower cost.

Related CHIMEI ABS grades

Compare PA-747

Back to CHIMEI ABS hub » | Home

Frequently asked questions

What is CHIMEI ABS PA-747 used for?

PA-747 is specified for power-tool bodies and protective gear where repeated impact would crack a GP grade. Its higher rubber content absorbs shock while staying moldable.

When should I choose PA-747 over similar grades?

Choose PA-747 when toughness beats gloss. For even colder environments or extreme impact, move to PA-709; for extruded sheet/pipe, use PA-747S.

What are the processing conditions for PA-747?

80 - 85 °C drying, 200 - 240 °C cylinder, 50 - 80 °C mold. See the Processing Guidelines section above.

Can I get TDS / MSDS / UL for PA-747?

Yes - request TDS, MSDS, RoHS, REACH and UL 94 documents for PA-747 via the contact page or WhatsApp, and we will send the PDFs directly.