Genuine CHIMEI POLYLAC ABS PA-709 original 25kg packaging & material.
CHIMEI POLYLAC ABS PA-709
Super-high-impact, low-temperature ABS for cold-environment parts.
- Super high impact
- Low-temperature toughness
- Cold-climate rated
- Robust
Product Summary & Applications
Key characteristics
- Super high impact
- Low-temperature toughness
- Cold-climate rated
- Robust
Typical applications
- Motorcycle fairings
- Safety helmets
- Snow-sport gear
- Filter housings
Application insight
PA-709 keeps its toughness down to -30 C, making it the choice for motorcycle fairings, helmets and outdoor equipment exposed to freezing impacts.
Cross-tags
Manufacturing & Quality Control
Injection-molding production line processing CHIMEI POLYLAC ABS resin.
Consistent supply, batch after batch
CHIMEI POLYLAC ABS PA-709 is supplied in the original 25kg moisture-proof packaging, stored in palletized warehouse stock and loaded into export containers for worldwide delivery. Lot numbers on every bag give full traceability from resin lot to your loading list.
Quality assurance
Each incoming lot is checked against the official TDS - melt flow, color and mechanical retention samples are kept for every shipment, and COA / MSDS / UL 94 documentation ships with the goods on request.
Technical Data Sheet - PA-709
Typical properties of CHIMEI POLYLAC ABS PA-709. Values marked 【待核实】 are family-typical estimates and must be confirmed against the official CHIMEI TDS.
| Property | Value |
|---|---|
| Melt Flow Rate | 20 g/10min |
| Density | 1.03 g/cm³ |
| Tensile Strength | 40 MPa |
| Izod Impact | 55 kJ/m² |
| Heat Deflection Temp | 90 °C |
| Flammability | HB - |
Test conditions: MFR at 220°C/10kg; properties per relevant ISO/ASTM methods. Always validate on your tool.
Processing Guidelines
Recommended injection-molding window for CHIMEI ABS PA-709.
- Drying temperature80 - 85 °C
- Drying time2 - 4 h
- Residual moisture< 0.05%
- Cylinder temperature200 - 240 °C
- Mold temperature50 - 80 °C
- Back pressure50 - 100 MPa
- Screw speed40 - 80 rpm
ABS is hygroscopic - pre-dry before processing to avoid silver streaks. All values are typical; confirm against the official TDS.
Mold tooling set up for PA-709 trial runs.
Download Center
Technical and compliance documents for CHIMEI ABS PA-709 are available on request.
- CHIMEI ABS PA-709 Technical Data Sheet (TDS) - request via contact page »
- CHIMEI ABS PA-709 Safety Data Sheet (MSDS/SDS) - request via contact page »
- CHIMEI ABS PA-709 RoHS Compliance - request via contact page »
- CHIMEI ABS PA-709 REACH SVHC - request via contact page »
- CHIMEI ABS PA-709 UL 94 Yellow Card - request via contact page »
- CHIMEI ABS PA-709 Certificate of Analysis (COA) - request via contact page »
All documents are provided free of charge - contact us with your company name and required grade, and we will send the PDFs by email or WhatsApp.
Selection & Differentiation
When to choose PA-709
Pick PA-709 when the part lives in cold or takes severe impact; it is the low-temp king of the high-impact family. For extrusion use PA-709P.
Selection advice
PA-709 vs PA-747: PA-709 for low-temp/severe impact; PA-747 for general high-impact at lower cost.
Related CHIMEI ABS grades
Compare PA-709
Frequently asked questions
What is CHIMEI ABS PA-709 used for?
PA-709 keeps its toughness down to -30 C, making it the choice for motorcycle fairings, helmets and outdoor equipment exposed to freezing impacts.
When should I choose PA-709 over similar grades?
Pick PA-709 when the part lives in cold or takes severe impact; it is the low-temp king of the high-impact family. For extrusion use PA-709P.
What are the processing conditions for PA-709?
80 - 85 °C drying, 200 - 240 °C cylinder, 50 - 80 °C mold. See the Processing Guidelines section above.
Can I get TDS / MSDS / UL for PA-709?
Yes - request TDS, MSDS, RoHS, REACH and UL 94 documents for PA-709 via the contact page or WhatsApp, and we will send the PDFs directly.