Genuine CHIMEI POLYLAC ABS PA-737 original 25kg packaging & material.
CHIMEI POLYLAC ABS PA-737
Food-contact, high-flow ABS for compliant housings and parts.
- Food-contact compliant
- High flow
- Low extractables
- Safe for proximity
Product Summary & Applications
Key characteristics
- Food-contact compliant
- High flow
- Low extractables
- Safe for proximity
Typical applications
- Appliance food-zone parts
- Kitchen device housings
- Water-contact parts
- Small appliances
Application insight
PA-737 is formulated for food-contact and water-proximity parts - blender housings, kettle-adjacent components and small-appliance shells needing compliant material.
Cross-tags
Manufacturing & Quality Control
Injection-molding production line processing CHIMEI POLYLAC ABS resin.
Consistent supply, batch after batch
CHIMEI POLYLAC ABS PA-737 is supplied in the original 25kg moisture-proof packaging, stored in palletized warehouse stock and loaded into export containers for worldwide delivery. Lot numbers on every bag give full traceability from resin lot to your loading list.
Quality assurance
Each incoming lot is checked against the official TDS - melt flow, color and mechanical retention samples are kept for every shipment, and COA / MSDS / UL 94 documentation ships with the goods on request.
Technical Data Sheet - PA-737
Typical properties of CHIMEI POLYLAC ABS PA-737. Values marked 【待核实】 are family-typical estimates and must be confirmed against the official CHIMEI TDS.
| Property | Value |
|---|---|
| Melt Flow Rate | 28 g/10min |
| Density | 1.05 g/cm³ |
| Tensile Strength | 46 MPa |
| Izod Impact | 18 kJ/m² |
| Heat Deflection Temp | 90 °C |
| Flammability | HB - |
Test conditions: MFR at 220°C/10kg; properties per relevant ISO/ASTM methods. Always validate on your tool.
Processing Guidelines
Recommended injection-molding window for CHIMEI ABS PA-737.
- Drying temperature80 - 85 °C
- Drying time2 - 4 h
- Residual moisture< 0.05%
- Cylinder temperature200 - 240 °C
- Mold temperature50 - 80 °C
- Back pressure50 - 100 MPa
- Screw speed40 - 80 rpm
ABS is hygroscopic - pre-dry before processing to avoid silver streaks. All values are typical; confirm against the official TDS.
Mold tooling set up for PA-737 trial runs.
Download Center
Technical and compliance documents for CHIMEI ABS PA-737 are available on request.
- CHIMEI ABS PA-737 Technical Data Sheet (TDS) - request via contact page »
- CHIMEI ABS PA-737 Safety Data Sheet (MSDS/SDS) - request via contact page »
- CHIMEI ABS PA-737 RoHS Compliance - request via contact page »
- CHIMEI ABS PA-737 REACH SVHC - request via contact page »
- CHIMEI ABS PA-737 UL 94 Yellow Card - request via contact page »
- CHIMEI ABS PA-737 Certificate of Analysis (COA) - request via contact page »
All documents are provided free of charge - contact us with your company name and required grade, and we will send the PDFs by email or WhatsApp.
Selection & Differentiation
When to choose PA-737
Choose PA-737 when the part touches or neighbors food/water; standard GP ABS may lack the compliance documentation. PA-797 is the medical step-up.
Selection advice
PA-737 vs PA-757: compliance vs generic gloss. vs PA-797: food-contact vs medical-grade.
Related CHIMEI ABS grades
Compare PA-737
Frequently asked questions
What is CHIMEI ABS PA-737 used for?
PA-737 is formulated for food-contact and water-proximity parts - blender housings, kettle-adjacent components and small-appliance shells needing compliant material.
When should I choose PA-737 over similar grades?
Choose PA-737 when the part touches or neighbors food/water; standard GP ABS may lack the compliance documentation. PA-797 is the medical step-up.
What are the processing conditions for PA-737?
80 - 85 °C drying, 200 - 240 °C cylinder, 50 - 80 °C mold. See the Processing Guidelines section above.
Can I get TDS / MSDS / UL for PA-737?
Yes - request TDS, MSDS, RoHS, REACH and UL 94 documents for PA-737 via the contact page or WhatsApp, and we will send the PDFs directly.