Genuine CHIMEI POLYLAC ABS PA-777E original 25kg packaging & material.
CHIMEI POLYLAC ABS PA-777E
Heat-resistant electroplating ABS for premium chrome-look heat parts.
- High HDT
- Electroplating grade
- Heat resistant
- Premium finish
Product Summary & Applications
Key characteristics
- High HDT
- Electroplating grade
- Heat resistant
- Premium finish
Typical applications
- Automotive chrome trims
- Heated appliance trims
- Decorative heat parts
- Brand logos
Application insight
PA-777E merges the heat-resistant family with electroplating quality, giving chrome-look automotive and appliance trims that also survive warm environments.
Cross-tags
Manufacturing & Quality Control
Injection-molding production line processing CHIMEI POLYLAC ABS resin.
Consistent supply, batch after batch
CHIMEI POLYLAC ABS PA-777E is supplied in the original 25kg moisture-proof packaging, stored in palletized warehouse stock and loaded into export containers for worldwide delivery. Lot numbers on every bag give full traceability from resin lot to your loading list.
Quality assurance
Each incoming lot is checked against the official TDS - melt flow, color and mechanical retention samples are kept for every shipment, and COA / MSDS / UL 94 documentation ships with the goods on request.
Technical Data Sheet - PA-777E
Typical properties of CHIMEI POLYLAC ABS PA-777E. Values marked 【待核实】 are family-typical estimates and must be confirmed against the official CHIMEI TDS.
| Property | Value |
|---|---|
| Melt Flow Rate | 14 g/10min |
| Density | 1.06 g/cm³ |
| Tensile Strength | 50 MPa |
| Izod Impact | 18 kJ/m² |
| Heat Deflection Temp | 115 °C |
| Flammability | HB - |
Test conditions: MFR at 220°C/10kg; properties per relevant ISO/ASTM methods. Always validate on your tool.
Processing Guidelines
Recommended injection-molding window for CHIMEI ABS PA-777E.
- Drying temperature80 - 85 °C
- Drying time2 - 4 h
- Residual moisture< 0.05%
- Cylinder temperature200 - 240 °C
- Mold temperature50 - 80 °C
- Back pressure50 - 100 MPa
- Screw speed40 - 80 rpm
ABS is hygroscopic - pre-dry before processing to avoid silver streaks. All values are typical; confirm against the official TDS.
Mold tooling set up for PA-777E trial runs.
Download Center
Technical and compliance documents for CHIMEI ABS PA-777E are available on request.
- CHIMEI ABS PA-777E Technical Data Sheet (TDS) - request via contact page »
- CHIMEI ABS PA-777E Safety Data Sheet (MSDS/SDS) - request via contact page »
- CHIMEI ABS PA-777E RoHS Compliance - request via contact page »
- CHIMEI ABS PA-777E REACH SVHC - request via contact page »
- CHIMEI ABS PA-777E UL 94 Yellow Card - request via contact page »
- CHIMEI ABS PA-777E Certificate of Analysis (COA) - request via contact page »
All documents are provided free of charge - contact us with your company name and required grade, and we will send the PDFs by email or WhatsApp.
Selection & Differentiation
When to choose PA-777E
Pick PA-777E when you need both plating quality and heat resistance; PA-727 plates well but lacks the HDT, PA-777D resists heat but plates poorly.
Selection advice
PA-777E vs PA-727: heat + plate vs plate only. vs PA-777D: plate vs pure heat.
Related CHIMEI ABS grades
Compare PA-777E
Frequently asked questions
What is CHIMEI ABS PA-777E used for?
PA-777E merges the heat-resistant family with electroplating quality, giving chrome-look automotive and appliance trims that also survive warm environments.
When should I choose PA-777E over similar grades?
Pick PA-777E when you need both plating quality and heat resistance; PA-727 plates well but lacks the HDT, PA-777D resists heat but plates poorly.
What are the processing conditions for PA-777E?
80 - 85 °C drying, 200 - 240 °C cylinder, 50 - 80 °C mold. See the Processing Guidelines section above.
Can I get TDS / MSDS / UL for PA-777E?
Yes - request TDS, MSDS, RoHS, REACH and UL 94 documents for PA-777E via the contact page or WhatsApp, and we will send the PDFs directly.