Genuine CHIMEI POLYLAC ABS PA-709P original 25kg packaging & material.
CHIMEI POLYLAC ABS PA-709P
Extrusion super-high-impact ABS for low-temp sheet and profile.
- Extrusion grade
- Super high impact
- Low-temp toughness
- Sheet/pipe suited
Product Summary & Applications
Key characteristics
- Extrusion grade
- Super high impact
- Low-temp toughness
- Sheet/pipe suited
Typical applications
- Refrigerator liners
- Cold-chain profiles
- Outdoor sheet
- Pipe
Application insight
PA-709P brings PA-709-level toughness to extruded sheet and profiles - refrigerator liners and cold-chain panels that must stay ductile at low temperature.
Cross-tags
Manufacturing & Quality Control
Injection-molding production line processing CHIMEI POLYLAC ABS resin.
Consistent supply, batch after batch
CHIMEI POLYLAC ABS PA-709P is supplied in the original 25kg moisture-proof packaging, stored in palletized warehouse stock and loaded into export containers for worldwide delivery. Lot numbers on every bag give full traceability from resin lot to your loading list.
Quality assurance
Each incoming lot is checked against the official TDS - melt flow, color and mechanical retention samples are kept for every shipment, and COA / MSDS / UL 94 documentation ships with the goods on request.
Technical Data Sheet - PA-709P
Typical properties of CHIMEI POLYLAC ABS PA-709P. Values marked 【待核实】 are family-typical estimates and must be confirmed against the official CHIMEI TDS.
| Property | Value |
|---|---|
| Melt Flow Rate | 10 g/10min |
| Density | 1.03 g/cm³ |
| Tensile Strength | 40 MPa |
| Izod Impact | 50 kJ/m² |
| Heat Deflection Temp | 88 °C |
| Flammability | HB - |
Test conditions: MFR at 220°C/10kg; properties per relevant ISO/ASTM methods. Always validate on your tool.
Processing Guidelines
Recommended injection-molding window for CHIMEI ABS PA-709P.
- Drying temperature80 - 85 °C
- Drying time2 - 4 h
- Residual moisture< 0.05%
- Cylinder temperature200 - 240 °C
- Mold temperature50 - 80 °C
- Back pressure50 - 100 MPa
- Screw speed40 - 80 rpm
ABS is hygroscopic - pre-dry before processing to avoid silver streaks. All values are typical; confirm against the official TDS.
Mold tooling set up for PA-709P trial runs.
Download Center
Technical and compliance documents for CHIMEI ABS PA-709P are available on request.
- CHIMEI ABS PA-709P Technical Data Sheet (TDS) - request via contact page »
- CHIMEI ABS PA-709P Safety Data Sheet (MSDS/SDS) - request via contact page »
- CHIMEI ABS PA-709P RoHS Compliance - request via contact page »
- CHIMEI ABS PA-709P REACH SVHC - request via contact page »
- CHIMEI ABS PA-709P UL 94 Yellow Card - request via contact page »
- CHIMEI ABS PA-709P Certificate of Analysis (COA) - request via contact page »
All documents are provided free of charge - contact us with your company name and required grade, and we will send the PDFs by email or WhatsApp.
Selection & Differentiation
When to choose PA-709P
Choose PA-709P for extruded low-temp parts; PA-709 is the injection version. Confirm process before substitution.
Selection advice
PA-709P vs PA-709: same toughness, extrusion vs injection process.
Related CHIMEI ABS grades
Compare PA-709P
Frequently asked questions
What is CHIMEI ABS PA-709P used for?
PA-709P brings PA-709-level toughness to extruded sheet and profiles - refrigerator liners and cold-chain panels that must stay ductile at low temperature.
When should I choose PA-709P over similar grades?
Choose PA-709P for extruded low-temp parts; PA-709 is the injection version. Confirm process before substitution.
What are the processing conditions for PA-709P?
80 - 85 °C drying, 200 - 240 °C cylinder, 50 - 80 °C mold. See the Processing Guidelines section above.
Can I get TDS / MSDS / UL for PA-709P?
Yes - request TDS, MSDS, RoHS, REACH and UL 94 documents for PA-709P via the contact page or WhatsApp, and we will send the PDFs directly.