Genuine CHIMEI POLYLAC ABS PA-747S original 25kg packaging & material.
CHIMEI POLYLAC ABS PA-747S
Extrusion-grade high-impact ABS for sheet, profile and pipe.
- Extrusion grade
- High impact
- Good draw-down
- Sheet/pipe suited
Product Summary & Applications
Key characteristics
- Extrusion grade
- High impact
- Good draw-down
- Sheet/pipe suited
Typical applications
- ABS sheets
- Refrigerator liners
- Profiles
- Pipe and fittings
Application insight
PA-747S is the extrusion counterpart of PA-747, used for refrigerator inner liners, decorative sheet and profiles where impact and thermoformability matter more than injection gloss.
Cross-tags
Manufacturing & Quality Control
Injection-molding production line processing CHIMEI POLYLAC ABS resin.
Consistent supply, batch after batch
CHIMEI POLYLAC ABS PA-747S is supplied in the original 25kg moisture-proof packaging, stored in palletized warehouse stock and loaded into export containers for worldwide delivery. Lot numbers on every bag give full traceability from resin lot to your loading list.
Quality assurance
Each incoming lot is checked against the official TDS - melt flow, color and mechanical retention samples are kept for every shipment, and COA / MSDS / UL 94 documentation ships with the goods on request.
Technical Data Sheet - PA-747S
Typical properties of CHIMEI POLYLAC ABS PA-747S. Values marked 【待核实】 are family-typical estimates and must be confirmed against the official CHIMEI TDS.
| Property | Value |
|---|---|
| Melt Flow Rate | 14 g/10min |
| Density | 1.04 g/cm³ |
| Tensile Strength | 42 MPa |
| Izod Impact | 35 kJ/m² |
| Heat Deflection Temp | 90 °C |
| Flammability | HB - |
Test conditions: MFR at 220°C/10kg; properties per relevant ISO/ASTM methods. Always validate on your tool.
Processing Guidelines
Recommended injection-molding window for CHIMEI ABS PA-747S.
- Drying temperature80 - 85 °C
- Drying time2 - 4 h
- Residual moisture< 0.05%
- Cylinder temperature200 - 240 °C
- Mold temperature50 - 80 °C
- Back pressure50 - 100 MPa
- Screw speed40 - 80 rpm
ABS is hygroscopic - pre-dry before processing to avoid silver streaks. All values are typical; confirm against the official TDS.
Mold tooling set up for PA-747S trial runs.
Download Center
Technical and compliance documents for CHIMEI ABS PA-747S are available on request.
- CHIMEI ABS PA-747S Technical Data Sheet (TDS) - request via contact page »
- CHIMEI ABS PA-747S Safety Data Sheet (MSDS/SDS) - request via contact page »
- CHIMEI ABS PA-747S RoHS Compliance - request via contact page »
- CHIMEI ABS PA-747S REACH SVHC - request via contact page »
- CHIMEI ABS PA-747S UL 94 Yellow Card - request via contact page »
- CHIMEI ABS PA-747S Certificate of Analysis (COA) - request via contact page »
All documents are provided free of charge - contact us with your company name and required grade, and we will send the PDFs by email or WhatsApp.
Selection & Differentiation
When to choose PA-747S
Pick PA-747S for extrusion/thermoforming; pick PA-747 for injection molding. Do not substitute across processes without re-qualification.
Selection advice
PA-747S vs PA-747: same toughness family, different process window (extrusion vs injection).
Related CHIMEI ABS grades
Compare PA-747S
Frequently asked questions
What is CHIMEI ABS PA-747S used for?
PA-747S is the extrusion counterpart of PA-747, used for refrigerator inner liners, decorative sheet and profiles where impact and thermoformability matter more than injection gloss.
When should I choose PA-747S over similar grades?
Pick PA-747S for extrusion/thermoforming; pick PA-747 for injection molding. Do not substitute across processes without re-qualification.
What are the processing conditions for PA-747S?
80 - 85 °C drying, 200 - 240 °C cylinder, 50 - 80 °C mold. See the Processing Guidelines section above.
Can I get TDS / MSDS / UL for PA-747S?
Yes - request TDS, MSDS, RoHS, REACH and UL 94 documents for PA-747S via the contact page or WhatsApp, and we will send the PDFs directly.