Genuine CHIMEI POLYLAC ABS PA-726 original 25kg packaging & material.
CHIMEI POLYLAC ABS PA-726
Electroplating ABS alternative with broad molding window.
- Electroplating grade
- Easy molding
- Low stress
- Good plate
Product Summary & Applications
Key characteristics
- Electroplating grade
- Easy molding
- Low stress
- Good plate
Typical applications
- Decorative trims
- Furniture fittings
- Sanitary ware
- Logo bases
Application insight
PA-726 is offered as a second plating option with a forgiving molding window, common for furniture fittings and sanitary decorative parts.
Cross-tags
Manufacturing & Quality Control
Injection-molding production line processing CHIMEI POLYLAC ABS resin.
Consistent supply, batch after batch
CHIMEI POLYLAC ABS PA-726 is supplied in the original 25kg moisture-proof packaging, stored in palletized warehouse stock and loaded into export containers for worldwide delivery. Lot numbers on every bag give full traceability from resin lot to your loading list.
Quality assurance
Each incoming lot is checked against the official TDS - melt flow, color and mechanical retention samples are kept for every shipment, and COA / MSDS / UL 94 documentation ships with the goods on request.
Technical Data Sheet - PA-726
Typical properties of CHIMEI POLYLAC ABS PA-726. Values marked 【待核实】 are family-typical estimates and must be confirmed against the official CHIMEI TDS.
| Property | Value |
|---|---|
| Melt Flow Rate | 20 g/10min |
| Density | 1.05 g/cm³ |
| Tensile Strength | 46 MPa |
| Izod Impact | 20 kJ/m² |
| Heat Deflection Temp | 95 °C |
| Flammability | HB - |
Test conditions: MFR at 220°C/10kg; properties per relevant ISO/ASTM methods. Always validate on your tool.
Processing Guidelines
Recommended injection-molding window for CHIMEI ABS PA-726.
- Drying temperature80 - 85 °C
- Drying time2 - 4 h
- Residual moisture< 0.05%
- Cylinder temperature200 - 240 °C
- Mold temperature50 - 80 °C
- Back pressure50 - 100 MPa
- Screw speed40 - 80 rpm
ABS is hygroscopic - pre-dry before processing to avoid silver streaks. All values are typical; confirm against the official TDS.
Mold tooling set up for PA-726 trial runs.
Download Center
Technical and compliance documents for CHIMEI ABS PA-726 are available on request.
- CHIMEI ABS PA-726 Technical Data Sheet (TDS) - request via contact page »
- CHIMEI ABS PA-726 Safety Data Sheet (MSDS/SDS) - request via contact page »
- CHIMEI ABS PA-726 RoHS Compliance - request via contact page »
- CHIMEI ABS PA-726 REACH SVHC - request via contact page »
- CHIMEI ABS PA-726 UL 94 Yellow Card - request via contact page »
- CHIMEI ABS PA-726 Certificate of Analysis (COA) - request via contact page »
All documents are provided free of charge - contact us with your company name and required grade, and we will send the PDFs by email or WhatsApp.
Selection & Differentiation
When to choose PA-726
Pick PA-726 when PA-727's molding window is tight on your tool; both deliver platable surfaces.
Selection advice
PA-726 vs PA-727: alternate plating grades; choose by tool/machine fit.
Related CHIMEI ABS grades
Compare PA-726
Frequently asked questions
What is CHIMEI ABS PA-726 used for?
PA-726 is offered as a second plating option with a forgiving molding window, common for furniture fittings and sanitary decorative parts.
When should I choose PA-726 over similar grades?
Pick PA-726 when PA-727's molding window is tight on your tool; both deliver platable surfaces.
What are the processing conditions for PA-726?
80 - 85 °C drying, 200 - 240 °C cylinder, 50 - 80 °C mold. See the Processing Guidelines section above.
Can I get TDS / MSDS / UL for PA-726?
Yes - request TDS, MSDS, RoHS, REACH and UL 94 documents for PA-726 via the contact page or WhatsApp, and we will send the PDFs directly.