Genuine CHIMEI POLYLAC ABS PA-727 original 25kg packaging & material.
CHIMEI POLYLAC ABS PA-727
Electroplating ABS for uniform, adherent chrome plating.
- Electroplating grade
- Low stress
- Low shrink
- Uniform plate
Product Summary & Applications
Key characteristics
- Electroplating grade
- Low stress
- Low shrink
- Uniform plate
Typical applications
- Automotive grilles
- Door handles
- Decorative trims
- Sanitary fittings
Application insight
PA-727 is the plating workhorse for automotive grilles and door handles, with a low-stress surface that takes chrome uniformly without blistering.
Cross-tags
Manufacturing & Quality Control
Injection-molding production line processing CHIMEI POLYLAC ABS resin.
Consistent supply, batch after batch
CHIMEI POLYLAC ABS PA-727 is supplied in the original 25kg moisture-proof packaging, stored in palletized warehouse stock and loaded into export containers for worldwide delivery. Lot numbers on every bag give full traceability from resin lot to your loading list.
Quality assurance
Each incoming lot is checked against the official TDS - melt flow, color and mechanical retention samples are kept for every shipment, and COA / MSDS / UL 94 documentation ships with the goods on request.
Technical Data Sheet - PA-727
Typical properties of CHIMEI POLYLAC ABS PA-727. Values marked 【待核实】 are family-typical estimates and must be confirmed against the official CHIMEI TDS.
| Property | Value |
|---|---|
| Melt Flow Rate | 18 g/10min |
| Density | 1.05 g/cm³ |
| Tensile Strength | 46 MPa |
| Izod Impact | 20 kJ/m² |
| Heat Deflection Temp | 95 °C |
| Flammability | HB - |
Test conditions: MFR at 220°C/10kg; properties per relevant ISO/ASTM methods. Always validate on your tool.
Processing Guidelines
Recommended injection-molding window for CHIMEI ABS PA-727.
- Drying temperature80 - 85 °C
- Drying time2 - 4 h
- Residual moisture< 0.05%
- Cylinder temperature200 - 240 °C
- Mold temperature50 - 80 °C
- Back pressure50 - 100 MPa
- Screw speed40 - 80 rpm
ABS is hygroscopic - pre-dry before processing to avoid silver streaks. All values are typical; confirm against the official TDS.
Mold tooling set up for PA-727 trial runs.
Download Center
Technical and compliance documents for CHIMEI ABS PA-727 are available on request.
- CHIMEI ABS PA-727 Technical Data Sheet (TDS) - request via contact page »
- CHIMEI ABS PA-727 Safety Data Sheet (MSDS/SDS) - request via contact page »
- CHIMEI ABS PA-727 RoHS Compliance - request via contact page »
- CHIMEI ABS PA-727 REACH SVHC - request via contact page »
- CHIMEI ABS PA-727 UL 94 Yellow Card - request via contact page »
- CHIMEI ABS PA-727 Certificate of Analysis (COA) - request via contact page »
All documents are provided free of charge - contact us with your company name and required grade, and we will send the PDFs by email or WhatsApp.
Selection & Differentiation
When to choose PA-727
Choose PA-727 for plated appearance parts; PA-726 is the alternative plating grade, PA-777E adds heat resistance. Do not plate GP grades - adhesion fails.
Selection advice
PA-727 vs PA-726: both plate; pick per supplier molding window. vs PA-777E when heat is also required.
Related CHIMEI ABS grades
Compare PA-727
Frequently asked questions
What is CHIMEI ABS PA-727 used for?
PA-727 is the plating workhorse for automotive grilles and door handles, with a low-stress surface that takes chrome uniformly without blistering.
When should I choose PA-727 over similar grades?
Choose PA-727 for plated appearance parts; PA-726 is the alternative plating grade, PA-777E adds heat resistance. Do not plate GP grades - adhesion fails.
What are the processing conditions for PA-727?
80 - 85 °C drying, 200 - 240 °C cylinder, 50 - 80 °C mold. See the Processing Guidelines section above.
Can I get TDS / MSDS / UL for PA-727?
Yes - request TDS, MSDS, RoHS, REACH and UL 94 documents for PA-727 via the contact page or WhatsApp, and we will send the PDFs directly.