Genuine CHIMEI POLYLAC ABS PA-747F original 25kg packaging & material.
CHIMEI POLYLAC ABS PA-747F
Food-contact high-impact ABS for tough compliant parts.
- Food-contact compliant
- High impact
- Tough
- Safe for proximity
Product Summary & Applications
Key characteristics
- Food-contact compliant
- High impact
- Tough
- Safe for proximity
Typical applications
- Food-grade containers
- Kitchen appliance bodies
- Water-filter housings
- Tough food parts
Application insight
PA-747F pairs food-contact compliance with the toughness of the PA-747 family - water-filter housings and kitchen appliance bodies that must be both safe and durable.
Cross-tags
Manufacturing & Quality Control
Injection-molding production line processing CHIMEI POLYLAC ABS resin.
Consistent supply, batch after batch
CHIMEI POLYLAC ABS PA-747F is supplied in the original 25kg moisture-proof packaging, stored in palletized warehouse stock and loaded into export containers for worldwide delivery. Lot numbers on every bag give full traceability from resin lot to your loading list.
Quality assurance
Each incoming lot is checked against the official TDS - melt flow, color and mechanical retention samples are kept for every shipment, and COA / MSDS / UL 94 documentation ships with the goods on request.
Technical Data Sheet - PA-747F
Typical properties of CHIMEI POLYLAC ABS PA-747F. Values marked 【待核实】 are family-typical estimates and must be confirmed against the official CHIMEI TDS.
| Property | Value |
|---|---|
| Melt Flow Rate | 16 g/10min |
| Density | 1.04 g/cm³ |
| Tensile Strength | 42 MPa |
| Izod Impact | 33 kJ/m² |
| Heat Deflection Temp | 90 °C |
| Flammability | HB - |
Test conditions: MFR at 220°C/10kg; properties per relevant ISO/ASTM methods. Always validate on your tool.
Processing Guidelines
Recommended injection-molding window for CHIMEI ABS PA-747F.
- Drying temperature80 - 85 °C
- Drying time2 - 4 h
- Residual moisture< 0.05%
- Cylinder temperature200 - 240 °C
- Mold temperature50 - 80 °C
- Back pressure50 - 100 MPa
- Screw speed40 - 80 rpm
ABS is hygroscopic - pre-dry before processing to avoid silver streaks. All values are typical; confirm against the official TDS.
Mold tooling set up for PA-747F trial runs.
Download Center
Technical and compliance documents for CHIMEI ABS PA-747F are available on request.
- CHIMEI ABS PA-747F Technical Data Sheet (TDS) - request via contact page »
- CHIMEI ABS PA-747F Safety Data Sheet (MSDS/SDS) - request via contact page »
- CHIMEI ABS PA-747F RoHS Compliance - request via contact page »
- CHIMEI ABS PA-747F REACH SVHC - request via contact page »
- CHIMEI ABS PA-747F UL 94 Yellow Card - request via contact page »
- CHIMEI ABS PA-747F Certificate of Analysis (COA) - request via contact page »
All documents are provided free of charge - contact us with your company name and required grade, and we will send the PDFs by email or WhatsApp.
Selection & Differentiation
When to choose PA-747F
Choose PA-747F when you need food-contact compliance AND impact; PA-737 is lower impact, PA-747 is non-compliant.
Selection advice
PA-747F vs PA-737: tough + compliant vs flow + compliant. vs PA-747: compliance is the differentiator.
Related CHIMEI ABS grades
Compare PA-747F
Frequently asked questions
What is CHIMEI ABS PA-747F used for?
PA-747F pairs food-contact compliance with the toughness of the PA-747 family - water-filter housings and kitchen appliance bodies that must be both safe and durable.
When should I choose PA-747F over similar grades?
Choose PA-747F when you need food-contact compliance AND impact; PA-737 is lower impact, PA-747 is non-compliant.
What are the processing conditions for PA-747F?
80 - 85 °C drying, 200 - 240 °C cylinder, 50 - 80 °C mold. See the Processing Guidelines section above.
Can I get TDS / MSDS / UL for PA-747F?
Yes - request TDS, MSDS, RoHS, REACH and UL 94 documents for PA-747F via the contact page or WhatsApp, and we will send the PDFs directly.