Genuine CHIMEI POLYLAC ABS PA-763 original 25kg packaging & material.
CHIMEI POLYLAC ABS PA-763
Flame-retardant ABS (UL 94 V-0) with strong surface and stiffness.
- UL 94 V-0
- Good surface
- High stiffness
- Dimensional stable
Product Summary & Applications
Key characteristics
- UL 94 V-0
- Good surface
- High stiffness
- Dimensional stable
Typical applications
- E&E enclosures
- Office equipment
- Switch panels
- Instrument housings
Application insight
PA-763 is used where FR V-0 must pair with a clean, rigid surface - office-equipment and instrument housings that sit in view.
Cross-tags
Manufacturing & Quality Control
Injection-molding production line processing CHIMEI POLYLAC ABS resin.
Consistent supply, batch after batch
CHIMEI POLYLAC ABS PA-763 is supplied in the original 25kg moisture-proof packaging, stored in palletized warehouse stock and loaded into export containers for worldwide delivery. Lot numbers on every bag give full traceability from resin lot to your loading list.
Quality assurance
Each incoming lot is checked against the official TDS - melt flow, color and mechanical retention samples are kept for every shipment, and COA / MSDS / UL 94 documentation ships with the goods on request.
Technical Data Sheet - PA-763
Typical properties of CHIMEI POLYLAC ABS PA-763. Values marked 【待核实】 are family-typical estimates and must be confirmed against the official CHIMEI TDS.
| Property | Value |
|---|---|
| Melt Flow Rate | 20 g/10min |
| Density | 1.17 g/cm³ |
| Tensile Strength | 46 MPa |
| Izod Impact | 17 kJ/m² |
| Heat Deflection Temp | 86 °C |
| Flammability | V-0 - |
Test conditions: MFR at 220°C/10kg; properties per relevant ISO/ASTM methods. Always validate on your tool.
Processing Guidelines
Recommended injection-molding window for CHIMEI ABS PA-763.
- Drying temperature80 - 85 °C
- Drying time2 - 4 h
- Residual moisture< 0.05%
- Cylinder temperature200 - 240 °C
- Mold temperature50 - 80 °C
- Back pressure50 - 100 MPa
- Screw speed40 - 80 rpm
ABS is hygroscopic - pre-dry before processing to avoid silver streaks. All values are typical; confirm against the official TDS.
Mold tooling set up for PA-763 trial runs.
Download Center
Technical and compliance documents for CHIMEI ABS PA-763 are available on request.
- CHIMEI ABS PA-763 Technical Data Sheet (TDS) - request via contact page »
- CHIMEI ABS PA-763 Safety Data Sheet (MSDS/SDS) - request via contact page »
- CHIMEI ABS PA-763 RoHS Compliance - request via contact page »
- CHIMEI ABS PA-763 REACH SVHC - request via contact page »
- CHIMEI ABS PA-763 UL 94 Yellow Card - request via contact page »
- CHIMEI ABS PA-763 Certificate of Analysis (COA) - request via contact page »
All documents are provided free of charge - contact us with your company name and required grade, and we will send the PDFs by email or WhatsApp.
Selection & Differentiation
When to choose PA-763
Between PA-763 and PA-765, choose PA-763 when surface quality and stiffness matter more than absolute lowest cost; both are standard (non-halogen-free) FR.
Selection advice
PA-763 vs PA-765: similar FR class; PA-763 favors surface/stiffness. vs PA-765A: PA-765A is halogen-free.
Related CHIMEI ABS grades
Compare PA-763
Frequently asked questions
What is CHIMEI ABS PA-763 used for?
PA-763 is used where FR V-0 must pair with a clean, rigid surface - office-equipment and instrument housings that sit in view.
When should I choose PA-763 over similar grades?
Between PA-763 and PA-765, choose PA-763 when surface quality and stiffness matter more than absolute lowest cost; both are standard (non-halogen-free) FR.
What are the processing conditions for PA-763?
80 - 85 °C drying, 200 - 240 °C cylinder, 50 - 80 °C mold. See the Processing Guidelines section above.
Can I get TDS / MSDS / UL for PA-763?
Yes - request TDS, MSDS, RoHS, REACH and UL 94 documents for PA-763 via the contact page or WhatsApp, and we will send the PDFs directly.