Genuine CHIMEI POLYLAC ABS PA-764 original 25kg packaging & material.
CHIMEI POLYLAC ABS PA-764
UV-stable flame-retardant ABS for outdoor E&E enclosures.
- UL 94 V-0
- UV stabilized
- Outdoor rated
- Color-stable
Product Summary & Applications
Key characteristics
- UL 94 V-0
- UV stabilized
- Outdoor rated
- Color-stable
Typical applications
- Outdoor meter boxes
- Street-light housings
- Solar E&E
- Exterior connectors
Application insight
PA-764 keeps its flame-retardant rating while resisting UV yellowing, used for outdoor meter boxes and street-light electronics that see years of sun.
Cross-tags
Manufacturing & Quality Control
Injection-molding production line processing CHIMEI POLYLAC ABS resin.
Consistent supply, batch after batch
CHIMEI POLYLAC ABS PA-764 is supplied in the original 25kg moisture-proof packaging, stored in palletized warehouse stock and loaded into export containers for worldwide delivery. Lot numbers on every bag give full traceability from resin lot to your loading list.
Quality assurance
Each incoming lot is checked against the official TDS - melt flow, color and mechanical retention samples are kept for every shipment, and COA / MSDS / UL 94 documentation ships with the goods on request.
Technical Data Sheet - PA-764
Typical properties of CHIMEI POLYLAC ABS PA-764. Values marked 【待核实】 are family-typical estimates and must be confirmed against the official CHIMEI TDS.
| Property | Value |
|---|---|
| Melt Flow Rate | 22 g/10min |
| Density | 1.18 g/cm³ |
| Tensile Strength | 45 MPa |
| Izod Impact | 17 kJ/m² |
| Heat Deflection Temp | 85 °C |
| Flammability | V-0 (UV-stable) - |
Test conditions: MFR at 220°C/10kg; properties per relevant ISO/ASTM methods. Always validate on your tool.
Processing Guidelines
Recommended injection-molding window for CHIMEI ABS PA-764.
- Drying temperature80 - 85 °C
- Drying time2 - 4 h
- Residual moisture< 0.05%
- Cylinder temperature200 - 240 °C
- Mold temperature50 - 80 °C
- Back pressure50 - 100 MPa
- Screw speed40 - 80 rpm
ABS is hygroscopic - pre-dry before processing to avoid silver streaks. All values are typical; confirm against the official TDS.
Mold tooling set up for PA-764 trial runs.
Download Center
Technical and compliance documents for CHIMEI ABS PA-764 are available on request.
- CHIMEI ABS PA-764 Technical Data Sheet (TDS) - request via contact page »
- CHIMEI ABS PA-764 Safety Data Sheet (MSDS/SDS) - request via contact page »
- CHIMEI ABS PA-764 RoHS Compliance - request via contact page »
- CHIMEI ABS PA-764 REACH SVHC - request via contact page »
- CHIMEI ABS PA-764 UL 94 Yellow Card - request via contact page »
- CHIMEI ABS PA-764 Certificate of Analysis (COA) - request via contact page »
All documents are provided free of charge - contact us with your company name and required grade, and we will send the PDFs by email or WhatsApp.
Selection & Differentiation
When to choose PA-764
Pick PA-764 when the FR part is outdoors; a standard FR grade like PA-765 would yellow and chalk. PA-764B is the higher-stability variant.
Selection advice
PA-764 vs PA-765: PA-764 adds UV stability for outdoor use. vs PA-764B: 'B' for even longer color hold.
Related CHIMEI ABS grades
Compare PA-764
Frequently asked questions
What is CHIMEI ABS PA-764 used for?
PA-764 keeps its flame-retardant rating while resisting UV yellowing, used for outdoor meter boxes and street-light electronics that see years of sun.
When should I choose PA-764 over similar grades?
Pick PA-764 when the FR part is outdoors; a standard FR grade like PA-765 would yellow and chalk. PA-764B is the higher-stability variant.
What are the processing conditions for PA-764?
80 - 85 °C drying, 200 - 240 °C cylinder, 50 - 80 °C mold. See the Processing Guidelines section above.
Can I get TDS / MSDS / UL for PA-764?
Yes - request TDS, MSDS, RoHS, REACH and UL 94 documents for PA-764 via the contact page or WhatsApp, and we will send the PDFs directly.