Genuine CHIMEI POLYLAC ABS PA-765 original 25kg packaging & material.
CHIMEI POLYLAC ABS PA-765
Flame-retardant ABS (UL 94 V-0) for standard E&E enclosures.
- UL 94 V-0
- Flame retardant
- Good stiffness
- E&E suited
Product Summary & Applications
Key characteristics
- UL 94 V-0
- Flame retardant
- Good stiffness
- E&E suited
Typical applications
- Adapter housings
- Connector bodies
- Switch boxes
- Small E&E parts
Application insight
PA-765 delivers UL 94 V-0 at standard thickness for adapters, connectors and switch housings where cost-effective flame retardancy is required.
Cross-tags
Manufacturing & Quality Control
Injection-molding production line processing CHIMEI POLYLAC ABS resin.
Consistent supply, batch after batch
CHIMEI POLYLAC ABS PA-765 is supplied in the original 25kg moisture-proof packaging, stored in palletized warehouse stock and loaded into export containers for worldwide delivery. Lot numbers on every bag give full traceability from resin lot to your loading list.
Quality assurance
Each incoming lot is checked against the official TDS - melt flow, color and mechanical retention samples are kept for every shipment, and COA / MSDS / UL 94 documentation ships with the goods on request.
Technical Data Sheet - PA-765
Typical properties of CHIMEI POLYLAC ABS PA-765. Values marked 【待核实】 are family-typical estimates and must be confirmed against the official CHIMEI TDS.
| Property | Value |
|---|---|
| Melt Flow Rate | 22 g/10min |
| Density | 1.17 g/cm³ |
| Tensile Strength | 45 MPa |
| Izod Impact | 18 kJ/m² |
| Heat Deflection Temp | 85 °C |
| Flammability | V-0 - |
Test conditions: MFR at 220°C/10kg; properties per relevant ISO/ASTM methods. Always validate on your tool.
Processing Guidelines
Recommended injection-molding window for CHIMEI ABS PA-765.
- Drying temperature80 - 85 °C
- Drying time2 - 4 h
- Residual moisture< 0.05%
- Cylinder temperature200 - 240 °C
- Mold temperature50 - 80 °C
- Back pressure50 - 100 MPa
- Screw speed40 - 80 rpm
ABS is hygroscopic - pre-dry before processing to avoid silver streaks. All values are typical; confirm against the official TDS.
Mold tooling set up for PA-765 trial runs.
Download Center
Technical and compliance documents for CHIMEI ABS PA-765 are available on request.
- CHIMEI ABS PA-765 Technical Data Sheet (TDS) - request via contact page »
- CHIMEI ABS PA-765 Safety Data Sheet (MSDS/SDS) - request via contact page »
- CHIMEI ABS PA-765 RoHS Compliance - request via contact page »
- CHIMEI ABS PA-765 REACH SVHC - request via contact page »
- CHIMEI ABS PA-765 UL 94 Yellow Card - request via contact page »
- CHIMEI ABS PA-765 Certificate of Analysis (COA) - request via contact page »
All documents are provided free of charge - contact us with your company name and required grade, and we will send the PDFs by email or WhatsApp.
Selection & Differentiation
When to choose PA-765
Choose PA-765 for general FR E&E; choose PA-765A when a halogen-free formulation is mandated, and PA-765B when you need higher flow for thin-wall FR parts.
Selection advice
PA-765 vs PA-765A: PA-765A is halogen-free; PA-765 is the standard FR. Check the end-market green directive before choosing.
Related CHIMEI ABS grades
Compare PA-765
Frequently asked questions
What is CHIMEI ABS PA-765 used for?
PA-765 delivers UL 94 V-0 at standard thickness for adapters, connectors and switch housings where cost-effective flame retardancy is required.
When should I choose PA-765 over similar grades?
Choose PA-765 for general FR E&E; choose PA-765A when a halogen-free formulation is mandated, and PA-765B when you need higher flow for thin-wall FR parts.
What are the processing conditions for PA-765?
80 - 85 °C drying, 200 - 240 °C cylinder, 50 - 80 °C mold. See the Processing Guidelines section above.
Can I get TDS / MSDS / UL for PA-765?
Yes - request TDS, MSDS, RoHS, REACH and UL 94 documents for PA-765 via the contact page or WhatsApp, and we will send the PDFs directly.