CHIMEI ABS PA-764 vs PA-765: Properties & Differences
Side-by-side comparison of two genuine POLYLAC ABS grades to help you select the right one.
Property comparison
| Property | PA-764 | PA-765 |
|---|---|---|
| Melt Flow Rate | 22 g/10min | 22 g/10min |
| Density | 1.18 g/cm³ | 1.17 g/cm³ |
| Tensile Strength | 45 MPa | 45 MPa |
| Izod Impact | 17 kJ/m² | 18 kJ/m² |
| Heat Deflection Temp | 85 °C | 85 °C |
| Flammability | V-0 (UV-stable) - | V-0 - |
PA-764 is better when
Pick PA-764 when the FR part is outdoors; a standard FR grade like PA-765 would yellow and chalk. PA-764B is the higher-stability variant.
PA-765 is better when
Choose PA-765 for general FR E&E; choose PA-765A when a halogen-free formulation is mandated, and PA-765B when you need higher flow for thin-wall FR parts.
Which should I choose, PA-764 or PA-765?
PA-764 vs PA-765: PA-764 adds UV stability for outdoor use. vs PA-764B: 'B' for even longer color hold. PA-765 vs PA-765A: PA-765A is halogen-free; PA-765 is the standard FR. Check the end-market green directive before choosing.
Can I get both grades in one shipment?
Yes - mixed containers are available. Contact us on WhatsApp for a combined quotation.